LEAPERS Rifle scope 3x-12x32 1" Bugbuster AO Mil-dot optilised sihikud

Toote kirjeldus inglise keeles:

Rifle scope 3x-12x32 1" Bugbuster AO Mil-dot

DETAIL INFORMATION
• Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
• 1 Inch Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission
• Innovative EZ-TAP® Illumination Enhancing (IE) System with Red/Green Dual-Color Mode and 36 Color Multi-Color Mode to Accommodate All Weather/Light Conditions (US PAT. 8437079; EU PAT. EP2520894)
• 1-Click High-tech Illumination Memory Feature Gets You Right Back to the Color/Brightness Setting Last Used
• Premium Zero Lockable and Zero Resettable Target Turrets with Consistent and Precise 1/4 MOA Per Click Adjustment
• Range Estimating Mil-dot Reticle for Optimal Aiming and Shooting Performance
• Adjustable Objective from 2,7m to Infinity to Achieve Parallax-free View
• Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission
• Complete with 2" Sunshade, High Quality Flip-open Lens Caps and Lever Lock Quick-detachable Rings

RANGE ESTIMATING SCOPE:
Leapers/UTG started introducing mil-dot reticle optics from as early as 2003, pioneering the Range Estimating concept as a useful tool for hunters and shooters around the world. Today, mil-dot reticle is widely accepted and used in this industry. Leveraging our years of experience in this area, we developed and refined the unique Tactical Range Estimating(TRE) mil-dot reticle and offer this feature in almost all of our optics. With some patient learning and practice using our TRE, shooters can enhance accuracy and performance in ways not imagined before.
9 Dot TRE Mil-Dot:
Nine dots are featured spanning each side of the reticle's origin in the left, right, up, and down directions. These provide 18 points of aim across for both windage and elevation. When including the reticle's origin and the inner edges of the reticle's outer duplex a total of 21 points of aim are available.
6 Dot TRE Mil-Dot:
Six dots are featured spanning each side of the reticle's origin in the left, right, up, and down directions. These provide 12 points of aim across for both windage and elevation. When including the reticle's origin and the inner edges of the reticle's outer duplex a total of 15 points of aim are available.
4 DOT TRE Mil-Dot:
Four dots are featured spanning each side of the reticle's origin in the left, right, up, and down directions. These provide 8 points of aim across for both windage and elevation. When including the reticle's origin and the inner edges of the reticle's outer duplex a total of 11 points of aim are available. For 4 DOT TRE Mil-dot scopes with a floating reticle, sans the outer duplex, a total of 9 points of aim are available.
Mil-Dot Range Estimating:
Range estimating requires common knowledge/experience about your target's actual width or height.
Set your scope at 10X or the proper power, depending on the scope. View the target through the scope. Place the center of the dot against one edge of the target and measure to the opposite edge of the target.

Once the target has been measured in mils, depending on the scope model, a formula is available to estimate the distance of the target.
Each scope will come with a pre-calculated mil-dot table of most used distance estimates to aid the user.

Specifications:"

Magnification: 3x-9x
Tube Diameter: 25mm
Objective Diameter: 32mm
Field of View @ 100 yards: 37.7' - 14'
Eye Relief: 4.2" - 3.2"
Exit Pupil: 10.6mm - 3.6mm
Click Value @100 yards: 1/4"
Length: 216mm
Weight: 394g
Parallax Setting: 2,7m - Infinity
Batteries: CR1632 3V